SCREENFLEX 110  LiYCY
LOW VOLTAGE
300/500 V
HD21 / UNE 21031
Reference Norm


SCREENFLEX 110   LiYCY

Safe signal transmission.


Conductor: Electrolytic copper, class 5, based on EN 60228


Insulation: PVC.
The standard identification is the following:
2 x Blue + Brown
3 G Blue + Brown + Yellow/green
4 G Brown + Black + Grey + Yellow/green
4 x Brown + Black + Grey + Blue
5 G Brown + Black + Grey + Yellow/green + Blue
6 or more conductors Black numbered + Yellow/green.
Other identifications (JZ, OZ, J, Z) are available upon request.


Separator: Polyester tape.


Screen: Tinned copper braided screening.


Outer sheath: Flexible PVC, Black or grey colour.


Applications: Screenflex 110 is a screened control cable. It is used in all types of signal transmission connections where the voltage induced by an exterior electromagnetic field may affect the signal transmitted. Its most common applications are: control circuits, electronic equipment connections, computer systems, etc.


National norm / european: EN 60332-1 / EN 50266

International norm: IEC 60332-1 / IEC 60332-3


 

CHARACTERISTICS

Flexible conductor, class 5 Minimum service temperature: -15ºC Maximum service temperature: 70ºC
 
Maximum short-circuit temperature: 150ºC (max 5 s) Minimum bending radius: 5 x cable diameter Meter by meter marking
 
Flame non-propagation Fire non-propagation (only grey outer sheath) Impact resistance: AG1. Weak impact
 
Outdoor installation: occasional Water resistance: AD5 water jet Chemical & oil resistance: good
 
Electric fields resistant

INSTALLATION CONDITIONS

Industrial use Domestic use
 
Damp environment
Border